Відео

It's too bad that it doesn't protect the trans lines. Those seem to be the most fragile thing down there.

05 4.7 going strong. Exhaust bolts, blend door actuator and illumination of the climate control panel only issues. Been a fantastic vehicle. Tows very well, rides really well, off-roads well, does nothing great and everything well, not the worst in my opinion at all.

Thank you

Thanks for the tip I used a magnifying head set to see the cracks and recommend getting on of those to anyone not 25 with great eye site as these cracks are there like you said but too small for my old ass to see lol

I bought a Westin oil and tranny skid for my jk 3.8. This was after I bashed my tranny pan and leaked several quarts out. Topped her off an got home. Aftermarket tranny pan was thicker and had a drain plug. Engine oil pan had a dent in it but no leak. Put the Westin skid on and have beat it up off-road a lot not problems. Westin is a good product

There's a shop here in town that charges $500 to swap a thermostat. This guy made it look easy. I want to replace it with an aluminum one though.

Thanks Tyler😁👍

👍

You can replace the cooler which is a piece of garbage and then the left bank valve train (which happened to mine) then replacing the left head because of cracked valves and not the dealer tells me that I have coolant leaking THROUGH the cylinder WALLS and contaminating the oil. He told me these are common problems. He ordered a new engine and they are on 5-6 month back order. His remedy for the wait, "drive it until it blows up" There are recalls and class action law suits for all of these problems. Stelantis has known about these problems for many years!

What about 2020 longhorn

Looks great Tyler! Great video ! Just FYI one less white TRX in town now, sold mine last week to Eddy's chevy who sold it to a guy in NH. Glad see you finally got your PPF work done. I have had Andrew do work on several of my vehicles for me since you recommended him to me last year, thanks again! Andrew did the PPF and vinyl work for me on my new 24 Ranger Raptor just a few weeks ago. Also bougth a new RAM HD that Andrew is going to be doing PPF work on for me next month. Andrew really does great work. Still have my wide-body shaker Scat-pack, but it's a just a big garage queen, she is over year old now with only 130 miles on it. LOL Andrew did the PPF work on that car as well last year. Again great video. Keep up the great work.

Thank you! I thought i needed an alignment and i balanced my tires. Mine happens at 65mph.

Is the 4:1 transfer case system the one you want or and not the full time 4x4, right? On jeep build site, the transfer case system is exactly the same standard for both rubicon and rubicon X, that’s why I’m confused on what you said about buying the more reliable transfer case.

I’m guessing the lower section is gloss black because the factory clear coats the whole door at one time, and they use glossy clear.

How do you fix all the electrical issues?

Until today I didn't see how off looks that black two-tone shiny paint! Good catch Tyler!

I also have a 2024 Wrangler Rubicon. But I'm having the most difficult time getting my fingers in there to access the module as there's barely any room and my hands are only average size. Any tips? It's a 2 minute job that I'm now stuck. Thanks. UPDATE: I contacted their customer service and they were no help. There is something directly behind the wiring harness, something else above and in front. I’m only able to barely get one finger on it from below which isn’t enough to undo the clip and remove it. Given their return policy, it doesn't make sense to even try to return it. So I just spent $100 on something impossible to use. DO NOT DO BUSINESS WITH AUTOSTOPELIMINATOR or do so at your own risk.

Good looking rigs, they match your house perfectly as well! I grew up in Wichita, 30 mph winds are nothing for that area. 😂 The best mileage I’ve seen in our TRX has been in the mountains, consistently get 16-17 up in Colorado.

worst? now try the italian WK2.

Looks sharp

I like the change! I think it would look better if the gloss black was white to match the body but im sure that was a lot more money to repaint that.

Check your g mail sent

Paint corrosion, that's what I hate. I also hate Jeep for cheaping out on everything they can while running the actual price up

So the time isn't replacing the gasket it's fighting through all the crap beforehand, and you just need to take it all off..

What is your thought on the king shocks versus the factory shocks on ride quality on Road his truck looks just like mine except for mines stock but same year same color

Could you tell me what he did with the bead lock ring to be that color m? I have real bed lock rings not sure if it's the video or he powder coated them or what thought about changing mine to something different Also are those 37 a 12.50 or 13.50? Thanks Tyler

Okay been wanting a video on this forever!!! Thank you!!

Apply Super Lube.

I love how your wife was completely unimpressed. Holds her hands up and says my Prius does that.

Just hit 180k in my 2005. I've done a mix of On and Off road with mine and I've loved every mile! Get a well kept one with 4Lo and it's a nice mix of comfort and capability with the right mods!

Good luck with your new heater..laptop. Mine gets hot enough to burn my fingers while pressing wasd keys.

I was motivated by the dealer wanting $1k in labor. You make it look like a pro can do it in 3-4 hours and even a novice might take a day. You've given me some courage to tackle it myself...maybe. I'll be on the floor, which is no fun for me. Thanks for the video.

I've had this for almost a year😫 don't hate me

Are these cams also bolt-in for a 2005 "worst Jeep Grand Cherokee ever" 4.7L? Doing a valve cover gasket replacement and figured I'd replace hydraulic lash adjusters and upgrade rocker arms while I'm in there.... and cams too if possible! 😊

So, an update on my earlier comment: I just completed the passenger side valve cover replacement along with the full valve train service. Thanks again for your tip on securing the valve cover gasket, worth a gold star! I put a couple of drops of crazy glue where the locating bumps on the gasket are in the back. My tip on a relative pain free job: Move things out of the way! Remove battery and tray, oil filler neck and the transmission control module with bracket. Then move the AC compressor, heater lines ( push these down!) and wiring harness to the ECM (middle and engine side plugs only) out of the way. Tie off lines and wiring with zip ties as far away from the valve cover as you can. Now you have enough room to get to all the bolts and to wiggle the valve cover out and back in. And yes, I also replaced the bolt grommets and oil filler neck gasket ( was all part of the Felpro kit). My magnesium covers are in good shape too, so lucked out there.

Will this work also with 2022 ram limited 1500 ? If so can you link the new acc switch part number . Thanks in advance

Owen Wilson?

That’s a nice looking wj. Had the 1999 4.0 that was my grandmothers, then became my moms then my brothers lol and eventually it was mine. I wrecked it not too long ago being stupid with 300,000 miles on the odometer

Love the video. I own a 2019 zl1 6 speed not the 1le. I dont track mine and havent tried line lock for the fear of needing new tires right after lol

Hey Tyler, sorry to hear of your TRX issues. I have a 23 TRX. The truck has a handful of small and large issues. Rattles, clicks, noises where there shouldn't be, leaking shock, rear sliding glass window won't stay on the track, side mirror unresponsive to adjustment controls. Just unacceptable build quality. I love the truck but what's pushing me over the edge to dump it is the dealer experiences. Im on my third CDJR dealer trying to get my truck in for warranty repairs. It seems none of the dealers want to take on warranty repairs because they don't get paid as much from the manufacturer for a warranty repair vs customer pay. They lie and BS you until you move on to another dealer. The best you get is " drop it off, there is no guaranteed time before someone even looks at it, and we don't have any loaners for you". What is the NEW car warranty worth if you can't even get an APPOINTMENT to get your vehicle in? and if you do..they won't provide a loaner. Icing on the cake; New Safety Recall - 33B : Insufficient welds in steering column that would prevent DRIVER airbag from deploying in the event of an accident. As of today, no fix. Serious enough that FCA put a STOP SALE on unsold affected vehicles. Consumers who have already purchased have to keep driving at a safety risk I guess. Once again, love the truck and don't want to dump it.. wanted to see if you have any input given your position and experience.

sadly what he talk about is only viewable via thermal camera . And vehicule heat output make it hard to notice these big electrical misstake

I wanna buy the car

So if i were upgrading my lower intake manifold to an aluminum manifold should i clamp the fule line shut? Ive never really wirked on vehicles and your video is helping me son much! Thank you for the info!

Why do you talk exactly like Hoovie??

I have been looking high and low for a video that shows the correct winch wire routing in detail. This will help alot on my new winch install. Thank You

I did the exact same thing on my 2024 Rubicon. I did cut a nice little “U” shape in the red battery cover that lets it fit down a bit. Looks factory…👍🏻

Great install. Clean, fast and straight forward.

You guys made a lot of runs. I like the extra footage❤

This has been an issue on Ram trucks with aluminum drive shafts, not just TRX, for many years. Had a ‘15 Ram R/T with the driveshaft “clunk” issue. Never got it fixed as I got used to feeling like someone had bumped my rear bumper. Good to know the cause.

The gsl se are gems